*Innovative double disc turret with 23 tools; OD 12 tools, ID11 tools.
*Every 11 ID tools can be equipped with power tool.
*Power turret with the rear turning and milling function and sub-spindle combine to satisfy one set up machining.
*Innovative pneumatic-driven clamping system, less pollution and energy saving.
Specification
Capacity
--Max. swing over bed ø535 mm
--Max. turning diameter ø300 mm
--Max. turning length 500 mm
--Bar capacity ø 52 mm
Travese
--X axis 152 mm
--Z axis 500 mm
--W axis 550 mm
Spindle
--Speed 4800 rpm
--Chuck diameter 8"
--Spindle nose A2-6
--Hole through spindle diameter ø61 mm
--Front bearing ID/OD ø100 X ø150mm
--Rear bearing ID/OD ø 90 X ø140mm
--Spindle motor type FANUC £\P22 / 6000i
--Spindle motor power 11/15 kW
--Max. spindle speed torque 24.3 kg-m
Sub-Spindle
--Speed 5000 rpm
--Chuck diameter 6"
--Spindle nose A2-5
--Hole through spindle diameter ø52.5 mm
--Front bearing ID/OD ø85 X ø130mm
--Rear bearing ID/OD ø75 X ø115mm
--Spindle motor type FANUC ø6 / 10000i
--Spindle motor power 5.5/7.5 kW
--Max. spindle speed torque 9.74 kg-m
Turret
--Number of stations O.D. 12 Tools
I.D. 11 Tools
--Shank height for square tool 20*20 mm
--Shank diameter for boring bar ø32 mm
--Power tool shank diameter ø16(ER25) mm
--Power tool speed range at axial 3000 rpm
--Power tool speed range at radial 3000 rpm
--Power tool motor type (servo) FANUC £\30 / 3000i
--Power tool motor power 7 kW
Feedrate
--X axis rapid traverse 20000 mm/min
--Z axis rapid traverse 24000 mm/min
--W axis rapid traverse 16000 rpm
Dimensions
--Width 2600 mm
--Depth 1700 mm
--Weight 1600 mm
Friction Material
Design and specifications are subject to change without prior notice
Quick Navigator Menu: (Right-Click again to close this menu.)
